Wheel Rac will work with any Rac Compatible BOTE. Some models* feature mounting points on the underside of the board specifically for use with the Wheel Rac. Simply tilt your BOTE on its side to install or remove.
Models with Underside Mounting
ROVER / RACKHAM / HD
*Some styles. See product page for details.
For models that don’t have mounting points on the bottom of the board, you can insert the Wheel Rac into the receivers on the topside of the board. All inflatable boards are topside mounting, with the use of Rac Receivers attached to the deck.
Models with Topside Mounting
FLOOD / HD / RACKHAM / TRAVELLER
Thank you for submitting a review!
Your input is very much appreciated. Share it with your friends so they can enjoy it too!
Works great, easy to pop in and out.
Great addition to my Aero micro skiff. Highly recommended given the weight of the board. Have only used the wheels in the forward rack location. In that location, near the center of the board, almost all of the board weight is on the wheels and moving around is easy on the flats. The only issue is that in that center location you have to stay low (think 1 foot off the ground) to avoid having the nose or tail drag on the ground, and any transition from flat to a hill will high center the board. Putting the wheels in the back rack location would likely fix that problem (haven't tried it yet), but then there will be more weight to carry at the front of the board, and I'm lazy....
Got the wheels for my Rackham. Changed everything. We're in Maine, on a rocky coast. The wheels carry the board over tree roots, boulders, and dock steps with ease. Still not sure where to put the bungee cord, but I guess I don't need it! Great product.
The Wheel Rac works great!
My wheels finally arrived today and I got to test them out. My fiancé had pre-ordered them back around Christmas, so I’m excited that they finally came in!
They make getting a 12’ hard board to the water so much easier! I love the travel link system, but just because you can carry it on your shoulder, doesn’t mean you want to after a night of partying.
My only critique (small), is I would move the underside wheel rack wholes to forward of the topside rack holes. This would make pulling the board even easier! Not sure if you picked that location to protect the fin, but having the wheels closer to the center of gravity would be nice.
Still, 5 Stars, totally recommend!